News
- Oct-09
- Among alloy steels, the composition of alloy steel plate 51CrV4 is notable for including vanadium (V) and containing a comparatively high amount of chromium (Cr). Vanadium has a strong hardening effect on alloy steel plate 51CrV4. But this effect is parti
- Sep-30
- S355J2 AR steel is a non-alloy European standard (EN 10025-2) structural steel. S - stands for structural steel. 355 - stands for minimum yield strength (though it will vary based on thickness, refer below section for more details). S355J2 AR steel can wi
- Sep-30
- Material grade S355J2 offers high yield and tensile strength with a minimum yield strength of 355 Mpa. Material grade S355J2 is a structural grade steel which is widely used in engineering and construction industries. Material grade S355J2 can be supplied
- Sep-30
- Marine grade CCS AH40 steel plate owns higher steel strength at minimum yield strength 390 Mpa and with minimum tensile strength 510 Mpa. CCS AH40 steel plate needs to do low temperature impacting test under zero centigree when rolling.Marine grade CCS AH
- Sep-26
- 16Mo3 steel, designated with steel number 1.5415, is an European (DIN EN) steel grade for alloy steels.16Mo3 1.5415 steel plate is an EN10028-2 designated pressure vessel grade chromium-molybdenum alloy steel used at elevated working temperature. 16Mo3 1.
- Sep-25
- EN10028-2 boiler steel plate 16Mo3 is one of the extremely heat-resistant varieties of sheets and plates available in ASTM standards. EN10028-2 boiler steel plate 16Mo3 is composed mainly of molybdenum and manganese and chromium. EN10028-2 boiler steel pl
- Sep-24
- Carbon steel Q345B is a Chinese standardized low alloy high strength steel made with a hot-rolling process. Carbon steel Q345B is a steel with less than 0.2 percent of its composition made up of carbon, less than 0.55 percent of its composition made of si
- Sep-24
- Pressure vessel steel 16Mo3 is the extremely heat-resistant varieties available in EN standards. Pressure vessel steel 16Mo3 is composed mainly of molybdenum and manganese and chromium. Pressure vessel steel 16Mo3 is used as weldable steel in modern boile
- Sep-21
- EN standard high strength steel plate S355J2 is a low alloyed structural steel suitable for mechanical engineering etc. applications. EN standard high strength steel plate S355J2 posses a good weldability with max CEV =0.47 for all variants.EN standard hi
- Sep-20
- EN10025 S355J2 is one of the most common high strength steel materials for construction. S355J2 steel is a non-alloy structural steel to EN10025-2. With its increase yield strength of S355 MPa over other construction steels such as S275 and S235, S355J2 s
- Sep-19
- 16Mo3 steel plate is under EN10028-2 standard, and is usually regarded as pressure vessel quality steel, or shorten as PVQ steel.Due to the chrome and molybdenum content, pressure vessel quality PVQ 16Mo3 steel plate has excellent heat resistance and corr
- Sep-18
- EN10028 16Mo3 is designated with steel number 1.5415, is an European (DIN EN) alloy steel grade. EN10028 16Mo3 steel can be furnished in different product forms in accordance with relative EN standards.EN10028 16Mo3 steel is a pressure vessel steel that i
- Sep-18
- 16Mo3 is a EN10028-2 specified pressure vessel grade chrome molybdenum alloy steel for use in elevated working temperatures. 16Mo3 steel has excellent heat resistance and corrosion resistant characteristics. 16Mo3 steel is used as a weldable steel in the
- Sep-18
- 16Mo3 material is a chrome molybdenum based steel. Added chromium in the 16Mo3 steel increases its corrosion resistance whilst the higher molybdenum content promotes the increase in resistance to elevated temperatures. Therefore, chrome molybdenum steel 1
- Sep-12
- ASTM A516 Gr 70 steel for moderate and low temperature service is required to provide high strength, ductility, and toughness in pressure vessels that must serve at -45°C and lower.ASTM A516 Gr 70 steel plates are applicable for the construction o
- Sep-12
- ASTM A516 Gr 70 is comply with ASTM A516 / A516M standard, the standard specification for pressure vessel plates, carbon steel, for moderate and lower temperature service”. ASTM A516 Gr 70 steel is used throughout the oil and gas, chemical and power
- Sep-12
- For A516 Gr 70 VS A36, actually they have much difference. A36 plate is typical carbon steel for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.A36 plate can also be used in nonpressure parts o
- Sep-12
- ASTM A516 grade 70 plate is produced mainly for application in welded pressure vessels where improved notch toughness is important. Tensile strength range of ASTM A516 grade 70 plate is from 55 - 90 MPa and its versatility makes this specifications very p
- Sep-06
- 35CrMnSiA alloy steel plate has good comprehensive mechanical properties, high strength, enough toughness, hardenability and welding ability (preheat), and good processing formability after heat treatment. But the corrosion resistance and oxidation resist
- Sep-06
- Structural 30CrMnSiA alloy steel plate has high strength, good hardenability and sufficient toughness after quenching and tempering. Meanwhile, 30CrMnSiA alloy steel plate has good process ability, small processing deformation and good fatigue resistance
- Sep-06
- 50CrMo4 steel plate 1.7228 alloy steel sheet is quenching and tempering steel. It is produced in strict accordance with EN10083-3 technical standard. The chemical composition and mechnical properties of EN10083-3 50CrMo4 steel plate 1.7228 alloy steel she
- Sep-05
- EN10083 - 3 42CrMo4 alloy steel plate 1.7225 steel sheet is a common chromium-molybdenum steel that usually used after quenched and tempered, with high intensity, high hardenability. 42CrMo4 steel also has high strength, high toughness, good hardenability
- Sep-04
- Recently, the China Iron and Steel Industry Association released the operation of the iron and steel industry from January to July. The data show that in July, the growth rate of iron and steel production dropped significantly, steel prices remained relat
- Aug-30
- China’s crude steel production for July 2019 was 85.2 Mt, an increase of 5.0% compared to July 2018. India produced 9.2 Mt of crude steel in July 2019, an increase of 1.7% compared to July 2018. Japan produced 8.4 Mt of crude steel in July 2019, down 0.4%
- Aug-28
- Q310GNH steel plates plate welding is widely used. The weathering steel Q310GNH plate has been used for hundreds of years for metal forging. Q315NS low alloy sulfuric acid dew point corrosion resistant steel mainly relies on Cu, Cr, Sb elements to improve