50Cr grade steel is a Chinese GB standard (GB/T 3077) alloy structural steel. 50Cr material density is 7.85 g/cm³.
GB 50Cr alloy steel is produced in hot rolled and forged alloy steel bars which are not more than 250mm of nominal diameter or thickness.
Shanghai Katalor Enterprise is located in Pudong district of Shanghai city. It is only 30 minutes from Pudong International airport to our company. If you need GB 3077 50Cr alloy steel, 50Cr hot rolled bars or 50Cr square flats, we sincerely invite you to visit factory. We will pick you up at the airport if you tell us your schedule.
GB 3077 50Cr Chemical Composition
| Grade |
Chemical Composition |
|
50Cr |
The Element (%) |
|
C |
Si |
Mn |
Cr |
Mo |
Ni |
W |
B |
Al |
Ti |
V |
|
0.47-0.54 |
0.17-0.37 |
0.50-0.80 |
0.80-1.10 |
- |
- |
- |
- |
- |
- |
- |
GB 3077 50Cr Mechanical Property
|
Grade |
Mechanical Property |
|
50Cr |
Yield Strength
Mpa |
Tensile Strength
Mpa |
Elongation
% |
Impact energy
J |
|
1080 |
930 |
9 |
39 |
50Cr Heat Treatment
Annealing of 50Cr Alloy structural steel
Slowly heated to 850 ℃ and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. The 50Cr alloy steel will get MAX 250 HB(Brinell hardness.
Hardening of 50Cr Alloy structural steel
Heated slowly to 880-920°C, Then after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.
