EN10225 S420G2+M steel plates with few changes from EN 10113-3 and with minimum specified 355MPa yield strength and impact values measured at -40℃, supplied in the thermomechanically rolled condition.
EN 10225 specifies requirements for weldable structural steels to be used in the fabrication of fixed offshore structures in the form of plates up to and including 150 mm thick. It also specifies sections up to 63 mm thick except for sections delivered in the as-rolled condition which are permitted up to 25 mm thick only.
EN10225 S420G2+M Chemical Composition
|
Grade |
Chemical Composition |
|
S420G2+M |
The Element Max (%) |
|
C |
Si |
Mn |
P |
S |
Nb |
V |
Ti |
Al |
Cr |
Ni |
Mo |
Cu |
N |
|
0.14 |
0.15
|
0.55 |
1.65 |
0.020 |
0.007 |
0.040 |
0.080 |
0.025 |
0.015
|
0.055 |
0.25 |
0.70 |
0.25 |
0.30 |
0.010 |
EN10225 S420G2+ M Mechanical Property
|
Grade |
Mechanical Property |
|
S420G2+M |
Yield Strength
mm
Min(Mpa) |
Tensile Strength
mm
Min(Mpa) |
Elongation
Min,% |
|
|
|
≤
40 |
＞
40
≤
100 |
≤16 |
＞
16
≤
40 |
＞
40
≤
63 |
＞
63
≤
80 |
＞
80
≤
100 |
19 |
|
500-660 |
480-640 |
420 |
400 |
390 |
380 |
380 |
Based on positive and pragmatic attitude, efficient management system, and perfect after-sale service, Shanghai Katalor guarantees to provide you with the prime quality S420G1+ QT steel plates, S420G2+M steel sheet. If you have any needs, please feel free to contact us. We will offer you best products and service to you as soon as we get your inquiry.
