EN10149-2 S420MC Steel

S420MC steel equivalent has Grade Fe E420-TM, QStE 420TM, E420D, 50F45, 26 52-00.
This European Standard EN10149-2, in addition to EN 10149-1, specifies requirements for S420MC flat products made of weldable, hot-rolled, high yield strength steels for cold forming.
EN10149-2 S420MC steel products are given in the (chemical composition) and the (mechanical properties) and are supplied in the thermomechanically rolled delivery condition as given in the below.

S420MC steel specified in this European Standard are applicable to hot-rolled flat products in the thickness range of:

1. 1,5 mm to 20 mm for the steels which have a specified minimum yield strength of 315 MPa1) up to and including 460 MPa1);
2. 1,5 mm to 16 mm for the steels which have a specified minimum yield strength of 500 MPa1) up to and including 700 MPa1); and
3.  from 2 mm up to 10 mm for the steels with a minimum yield stress in the range from 900 MPa1) to 960 MPa1).

Note: 1 MPa = 1 N/mm².

EN10149-2 S420MC Chemical Composition   

Grade	Chemical Composition
S420MC	The Element Max (%)
	C	Si	Mn	P	S	Nb	V	Ti	Al	Mo	B
	0.12	050	1.60	0.025	0.015	0.09	0.20	0.15	0.015	-	-

EN10149-2 S420MC Mechanical Property

Grade	Mechanical Property
S420MC	Yield Strength mm Min(Mpa)	Tensile Strength mm Min(Mpa)	Elongation Min,%
			＜3	≥3
	420	480-620	16	19

Delivery condition:

S420MC material shall be supplied in the thermomechanically rolled delivery condition. The surface protection of descaled products shall be in accordance with EN 10149-1.

Shanghai Katalor Enterprise is located in Pudong district of Shanghai city. It is only 30 minutes from Pudong International airport to our company. If you need EN10149-2 S420MC steel plates, hot rolled flats, or S420MC heavy plates, we sincerely invite you to visit us. We will pick you up at the airport if you tell us your schedule.