S355J0 is a kind of low alloy steel under EN10025 standard. The impact test is at 0 centigrade temperature.
S355J0 steel has the proper tensile strength, good toughness, plasticity, processing property, and can be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.
EN10025-2 S355J0 Chemical Composition
|
Grade |
Chemical Composition |
|
S355J0 |
The Element Max (%) |
|
C |
Si |
Mn |
P |
S |
N |
Cu |
|
≤16 |
＞16≤40 |
＞40 |
|
0.23j |
0.23k |
0.24 |
0.60 |
1.70 |
0.040 |
0.040 |
0.014 |
0.60 |
EN10025-2 S355J0 Mechanical Property
|
Grade |
Mechanical Property |
|
S355J0 |
Yield Strength
mm
Min Mpa |
Tensile Strength
mm
Min Mpa |
|
≤16 |
＞16
≤
40 |
＞40
≤
63 |
＞63
≤
80 |
＞80
≤
100 |
＞100
≤
150 |
＞150
≤
200 |
＞200
≤
250 |
＞250
≤
400 |
＜3 |
≥
3
≤
100 |
＞100
≤
150 |
＞150
≤
250 |
＞250
≤
400 |
|
355 |
345 |
335 |
325 |
315 |
295 |
285 |
275 |
- |
510-680 |
470-630 |
450-600 |
450-600 |
- |
S355J0 hot rolled low alloy high yield steel plates are manufactured with hot rolled methods. S355J0 can be used in low temperature. The impact test is under 0 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.
S355J0 steel is also a kind of profile steel which is available as multiple or one off pieces. Flame cutting steel plates can be supplied surface ground and edge machined to your required sizes. All flame cutting steel pieces are dressed before final inspection and despatch. If you have any special requirements of S355J0 steel machining parts please inform our sales staff when you enquire for flame cutting steel profiles.
