ASTM A633 Grade D steel

ASTM A633 Grade D is made by adding a small amount of alloying elements on the basis of carbon structural steel. ASTM A633 Grade D has good welding performance, plasticity, toughness and processing properties, good corrosion resistance, higher strength and lower critical transition temperature of cold brittleness.
[email protected]
0086-21-61182423
Live Chat  Leave a Message

ASTM A633 Grade D is made by adding a small amount of alloying elements on the basis of carbon structural steel. ASTM A633 Grade D has good welding performance, plasticity, toughness and processing properties, good corrosion resistance, higher strength and lower critical transition temperature of cold brittleness. ASTM A633 Grade D is suitable for building bridges, ships, vehicles, railways, automobiles, tractors, large steel structures and large military projects.

ASTM A633 Grade D chemical composition

C

Si

Mn

P

S

Cu

Ni

Cr

Mo

≤0.20

0.15-0.50

0.70-1.60

≤0.035

≤0.04

≤0.35

≤0.25

≤0.25

≤0.08

 

ASTM A633 Grade D mechanical properties

Yield Strength Mpa

Tensile Strength Mpa

Elongation in 2 in. %

≧315

450-620

≧23

ASTM A633 Grade D has a higher toughness, and also has the good welding performance, cold and hot pressure processing performance and corrosion resistance. In addition to the basic elements of silicon or manganese, ASTM A633 Grade D also contains other elements, such as Cu, Ni, Cr, Mo and so on. ASTM A633 Grade D has the advantages of high strength, good comprehensive performance, long service life, wide application range and economic comparison.

Please feel free to contact Katalor for more information of ASTM A633 Grade D plates.

Contact Us