Q500NHC steel plate is corrosion resistant steel plate under GB-T 4171-2008 standard. Q500NH series steel plates have: (A, B, C, D, E), namely Q500NHA, Q500NHB, Q500NHC, Q500NHD, Q500NHE.
Q500NHC weathering steel plate/chemical composition/mechanical properties/BBN steel rolling process (Q500NHC flaw detection Z-direction performance)
Q500NHC steel plate executive standard: GB/T 4171-2008
Q500NHC steel characteristics: by adding a small amount of alloying elements such as: Cu, P, Cr, Ni, etc., Q500NHC steel corrosion resistant steel plate forms a protective layer on the surface of the metal substrate to improve the atmospheric corrosion resistance of the steel.
Q500NHC steel hot rolled plate stock
Material |
Size(mm) |
Category |
Source |
Type |
|
Q500NH |
22*965*1536 |
corrosion resistant steel plate |
Shanghai |
Spot |
|
Q500NH |
29*850*2045 |
corrosion resistant steel plate |
Shanghai |
Spot |
|
Q500NH |
16*1180*2560 |
corrosion resistant steel plate |
Shanghai |
Spot |
|
Q500NH |
21*1370*3224 |
corrosion resistant steel plate |
Shanghai |
Spot |
|
Q500NH |
18*1452*3868 |
corrosion resistant steel plate |
Shanghai |
Spot |
|
Q500NH |
29*1536*4290 |
corrosion resistant steel plate |
Shanghai |
Spot |
The surface quality of Q500NHC steel plate: There should be no cracks, scars, folds, bubbles, inclusions and delamination on the steel surface that are harmful to use. The surface of hot-rolled steel is allowed to have other defects that do not affect the use, but the minimum thickness of the steel should be guaranteed.
Q500NHC steel plate inspection rules: steel plates should be accepted in batches.
