50CrMo4 steel plate 1.7228 alloy steel sheet is quenching and tempering steel. It is produced in strict accordance with EN10083-3 technical standard. The chemical composition and mechnical properties of EN10083-3 50CrMo4 steel plate 1.7228 alloy steel sheet is as below.
EN10083-3 50CrMo4 steel plate 1.7228 alloy steel sheet chemical composition:
| Grade |
C |
Si Max |
Mn |
P Max |
S Max |
Cr |
Mo |
| EN10083-3 50CrMo4 |
0.46-0.54 |
0.4 |
0.5-0.8 |
0.025 |
0.035 |
0.9-1.2 |
0.15-0.30 |
EN10083-3 50CrMo4 steel plate 1.7228 alloy steel sheet mechanical properties:
| Grade |
Thickness |
Yield |
Tensile |
Elongation |
| 50CrMo4 |
mm |
Min Mpa |
Mpa |
Min % |
| 3<t≤8 |
900 |
1100-1300 |
9 |
| 8<t≤20 |
780 |
1000-1200 |
10 |
| 20<t≤60 |
700 |
900-1100 |
12 |
| 60<t≤100 |
650 |
850-1000 |
13 |
| 100<t≤160 |
550 |
800-950 |
13 |
Equivalent grades of 50CrMo4 steel / 1.7228 steel:
Warning! Only for reference
| EU |
Germany |
England |
China |
Inter |
| EN |
DIN,WNr |
BS |
GB |
ISO |
| 50CrMo4 |
50CrMo4 |
708M40 |
50CrMo |
50CrMo4 |
| |
708M50 |
|
|
EN10083-3 50CrMo4 steel plate 1.7228 alloy steel sheet features:
50CrMo4 steel is a super high strength alloy structural steel, with high strength and toughness, good hardenability and no obvious tempering brittle etc. features. EN10083-3 50CrMo4 steel is suitable for manufacturing large and medium-sized plastic molds with certain strength and toughness.
EN10083-3 50CrMo4 steel plate 1.7228 alloy steel sheet application:
EN10083-3 50CrMo4 steel is suitable for manufacturing large and medium plastic moulds which require certain strength and toughness. 50CrMo4 steel can be used to make large gear, turbocharger transmission gear, pressure vessel gear, rear axle, heavy load connecting rod and spring clip for locomotive traction. 50CrMo4 steel can also be used for deep drilling rod joint and fishing tool below 2000m, and can be used for mould of bending machine and so on.
