En 1092-2 P265GH vs En 10028-2 P265GH steel
En 10028-2 P265GH boiler steel is often considered to be a non-alloy quality material. Because the carbon steel grade p265gh tc1 flange has good weldable properties and is a pressure vessel and boiler steel grade material, it is used by the world's manufacturing fabricators. While the tensile strength of this carbon steel p265gh spacer blind flange ranges between 410 N/mm². to a max. of about 530 N/mm². At the standard thickness the minimum yield strength of these en 10216-2 p265gh forged flanges is about 265 MPa.
En 1092-2 P265GH steel vs En 10028-2 P265GH steel
Due to the en 1092-2 p265gh steel being weldable, in combination with its ability to withstand moderate to elevated temperatures, the flanges are often used in the manufacture for both steam boilers as well as pressurized vessel constructions. The p265gh en 10028-2 slip on flange is typically normalised by heating the material through the thickness of the flange to a temperature, which ranges between 890 °C to 950°C without the need for holding.
En 10028-2 P265GH used in the oil and gas industry
Like majority of the products manufactured in our factory, this grade of p265gh tc2 threaded flange produced by us is typically subjected to a variety of stringent tests conducted on them before being distributed to our suppliers. Apart from being used in the oil and gas industry, its advantageous features as well as its cost effectiveness make the p265gh tc1 blind flange one of the most ideal flanges to be used in the used in chemical industry and pharmaceutical process plants.
