P355NL1 steel is a normalized, weldable fine grain steels for pressure purposed. The dimensions and tolerance on dimensions should be according to EN 10028-1. EN 10028-3 P355NL1 steel is characterized by good weldability and high resistance to brittle cracking. These types are used above all for manufacturing vessels for pressurised gas (LPG, butane and propane tanks), pressure vessels, parts for steam boilers, pressure piping, compressors, etc. Their most widespread use is in application environments lower than -20º.
P355NL1 pressure vessel steel plates stock
Category |
Grade |
Size(mm) |
Pieces |
Weight(tons) |
Origin |
|
Pressure vessel steel |
P275NL1 |
8*2000*6000 |
4 |
3.016 |
Shanghai |
|
Pressure vessel steel |
P275NL1 |
14*2000*6000 |
3 |
3.957 |
Shanghai |
|
Pressure vessel steel |
P275NL1 |
8*2000*6000 |
1 |
0.754 |
Shanghai |
|
Pressure vessel steel |
P355GH |
35*2500*3330 |
1 |
2.287 |
Shanghai |
|
Pressure vessel steel |
P355GH |
60*3020*3400 |
1 |
4.836 |
Shanghai |
|
Pressure vessel steel |
P355NL2 |
12*2920*8900 |
1 |
2.448 |
Shanghai |
|
Pressure vessel steel |
P355NL1 |
14*2000*5250 |
1 |
1.154 |
Shanghai |
EN 10028-3 P355NL1 pressure vessel steel is supplied in the normalised condition. The normalising temperature is 900 - 950 ºC, and it must be left in the furnace after temperature equalising for approximately 1 minute per millimetre of thickness of the plate. As a result, it offers good cold-forming and hot-forming properties without negatively affecting the material properties.
